WAGNER GM 5000EA Operating Manual

Also see for GM 5000EA: Translation of the original operating manual Operating manual

Contents

WAGNER GM 5000EA Operating Manual Manual pdf 23 page image

23GM 5000EAOPERATING MANUALEDITION 03/2012 ORDER NUMBER DOC 2319149WARNINGIncorrect installation/operation!Risk of injury and damage to equipment When putting into operation and for all work, read and followthe operating instructions and safety regulations for the additionallyrequired system components.SIHI_0050_GB5.1.2 VENTILATION OF THE SPRAY BOOTHWARNINGToxic and/or flammable vapor mixtures!Risk of poisoning and burns Operate the unit in a spraying booth approved for the workingmaterials. -or- Operate the unit on an appropriate spraying wall with theventilation (extraction) switched on. Observe national and local regulations for the outgoing airspeed.SIHI_0028_GBThe GM 5000EA spray gun must be used a part of an electrostatic spraying system(spray-pack). The spraying system shown in the figure B_03233 is only one example ofan electrostatic air spraying system. Contact your Wagner distributor for assistance indesigning a system to meet your needs. The operating instructions and the safetyregulations for the additional system compo-nents used must be read before starting-up.The electrostatic hand spraying equipment is for use only in spray areas which correspondwith standard EN 12215.The electrostatic hand spraying equipment has to be locked to the technical ventilationso that the coating material supply and the high-voltage are not effective as long as thetechnical ventilation is not operated with the minimum exhaust air volume flow or a largerexhaust air volume flow.Ensure that the excess coating material (overspray) will be collected up safely.