WAGNER GM 5000EA Operating Manual

Also see for GM 5000EA: Translation of the original operating manual Operating manual

Contents

WAGNER GM 5000EA Operating Manual Manual pdf 36 page image

36GM 5000EAOPERATING MANUALEDITION 03/2012 ORDER NUMBER DOC 23191496 MAINTENANCE➞ Observe safety instructions in Chapter 2.The spray gun and the unit must be cleaned every day. Only use the cleaning solventrecommended by the paint manufacturer.CAUTIONCleaning agent in the air duct!Functional faults caused by swollen seals Never immerse the spray gun in cleaning agent.SIHI_0066_GBSIHI_0141_GBWARNINGIncorrect maintenance/repair!Risk of injury and damage to the equipment Repairs and part replacement may only be carried out byspecially trained staff or a WAGNER service center. Before all work on the unit and in the event of work interruptions:- Switch off the energy/compressed air supply.- Relieve the pressure from the spray gun and unit.- Secure the spray gun against actuation. Observe the operating instructions when carrying out all work.6.1 PERIODICALLY CHECKSFor the safe operation of electrostatic manual coating systems for flammable liquidspraying materials are intervals for periodically inspections defined as follows:Inspection point Inspection interval RemarksGun cleaning, flushing daily Chapter 2.2.4; chapter 6.1Earthing measures weekly Chapter 2.2.2; chapter 5.1.5Inspection for damage weekly Chapter 6.2; 6.3; 6.4 and 6.5Locking of the technical ventilation with theelectrostatic manual coating systemyearly Chapter 5.1.2The above recommended intervals are maximum values and may be modified fromoperator depending on the local and operational conditions and contamination.Damaged devices must be taken out of service immediately and repaired.6.2 CLEANING AND DECOMMISSIONING