WAGNER GM 5000EA Operating Manual

Also see for GM 5000EA: Translation of the original operating manual Operating manual

Contents

WAGNER GM 5000EA Operating Manual Manual pdf 20 page image

20GM 5000EAB_00180B_03446OPERATING MANUALEDITION 03/2012 ORDER NUMBER DOC 23191494.5 SPRAYING PROCESS4.5.1 AIR ATOMIZING SPRAY PROCESS - ROUND JETIn this process, the material (paint) is fed to the nozzle with low pressure (0.05-0.2 MPa; 0.5-2 bar; 7-29 psi).The atomizing air at approx. 0.25-0.4 MPa; 2.5-4 bar; 36-58 psi produces a soft jet, which largely eliminates theproblem of overlapping boundaries. There are various nozzles and air caps available as accessories for therespective spraying material and the output amounts.Spray patternUnion nutSpray materialAtomizing air4.5.2 AIR ATOMIZING SPRAY PROCESS - FLAT JETIn this process, the material (paint) is fed to the nozzle with low pressure (0.05-0.2 MPa; 0.5-2 bar; 7-29 psi).The atomizing air at approx. 0.25-0.4 MPa; 2.5-4 bar; 36-58 psi produces a soft jet, which largely eliminates theproblem of overlapping boundaries. The spray jet can be changed using the shaping air. There are variousnozzles and air caps available as accessories for the respective spraying material and the output amounts.Shaping airAir cap Spray patternAtomizing airAdvantages• Large range of adjustment of the jet spray• Low coating thicknessSpray material Spray angle• Uniform coating thickness• Perfect finishAdvantages• Low coating thickness• Uniform coating thickness• Perfect finish