WAGNER GM 5000EA Operating Manual

Also see for GM 5000EA: Translation of the original operating manual Operating manual

Contents

WAGNER GM 5000EA Operating Manual Manual pdf 41 page image

41GM 5000EAOPERATING MANUALEDITION 03/2012 ORDER NUMBER DOC 23191496.4 CLEANING THE PARTS AFTER DISASSEMBLYATTENTIONPlease note:➞ All reusable parts (except for the parts that conduct the high-voltage such as cascade,end piece, plug compl. etc.) should be cleaned thoroughly using a suitable cleaningagent.➞ The end piece, plug compl. and the handle inside must be clean and dry aftercleaning. Care should be taken that these parts remain free of solvents, grease orsweat from the hands (salt water).➞ Only spare parts are used which have undergone an EC type examination and aresubject to a quality assessment (production monitoring) according to Directive94/9/EC.➞ Spare parts may have safety-relevant properties.➞ Defective parts, O-rings and seal sets must always be re-placed.In chapter 10 can be found part numbers for gun spare parts as well as for wearing partssuch as seals.WARNINGIncompatibility of cleaning agent and working medium!Risk of explosion and danger of poisoning by toxic gasses Check the compatibility of cleaning agent and working mediumin accordance with safety data sheets.SIHI_0060_GB