WAGO-I/O-SYSTEM 750 Device Description 21750-658 CAN GatewayManualVersion 1.2.0, valid from FW/HW-Version 01/01Pos : 36 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/Ansc hl üss e/CAGE CLAMP- Anschl üss e - Ü berschrift 3 @ 6\mod_1256296337770_21.doc x @ 43674 @ 3 @ 14.2.3 CAGE CLAMP® ConnectorsPos : 37 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/Ansc hl üss e/Sonder klemmen/Ansc hlüsse CC 750-0658 @ 14\mod_1358431143982_21.doc x @ 108895 @ @ 1Figure 4: CAGE CLAMP ® ConnectorsTable 7: Legend for Figure “CAGE CLAMP ® Connectors”Connection Designation Function1 CAN-H CAN High2 CAN-GND CAN Ground3 0 V Supply voltage 0 V4 Shield Shield (screen)5 CAN-L CAN Low6 +24 V Supply voltage + 24 V7 N.C. -not connected-8 Shield Shield (screen)Pos : 38 /Serie 750 ( WAGO-I/O-SYST EM)/Wic htige Erläuterungen/Sicherheits- und sonstig e Hinweis e/Hi nweis /Hinweis: Geschir mte Signalleitung en ver wenden! @ 7\mod_1265723251019_21.doc x @ 50140 @ @ 1Use shielded signal lines!Only use shielded signal lines for analog signals and I/O modules which areequipped with shield clamps. Only then can you ensure that the accuracy andinterference immunity specified for the respective I/O module can be achievedeven in the presence of interference acting on the signal cable.Pos : 39 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
