WAGO-I/O-SYSTEM 750 Configuration and Parameterization 51750-658 CAN GatewayManualVersion 1.2.0, valid from FW/HW-Version 01/01Pos : 86.4 /Serie 750 (WAGO-I/O-SYST EM)/In Betrieb nehmen/Parametrier en mit WAGO-I/O-CH ECK/Kopi e von Konfigurier en und Par ametrieren mit WAGO-I/O-CHEC K 750-0658 (Fenster "Öffnen + Speic hern") @ 15\mod_1366293586080_21.doc x @ 117303 @ 3 @ 19.1.2 Load Parameters into the ApplicationTo load parameters into the application:1. Click the [Open] button. WAGO-I/O-CHECK displays the default dialogfor opening files.2. Select a parameter file.3. In the "Select data" dialog, select the parameters to be loaded from the file.Only parameters in the selected file can be selected.More information on the listed parameters is available in the “Parameters inthe ‘Select Data’ Dialog”.4. Click the [Load] button.All selected parameters are loaded in the application. The selected parameters“Configuration”, “Operating Mode” and “CAN Parameters” are also written to theI/O module.Figure 21: "Select Data" Dialog
