WAGO-I/O-SYSTEM 750 Configuration and Parameterization 69750-658 CAN GatewayManualVersion 1.2.0, valid from FW/HW-Version 01/01Do not select the "Overwrite" setting for protocol data!The "Overwrite" setting should not be selected when protocol data is transmitted.The protocol data may be unusable because all data of a CAN ID is required ingeneral. Select the "Keep All" setting here.CAN telegrams of a defined range can also be received and sent via the mailbox.Figure 36: Send CAN Telegrams via the MailboxTo select this option, proceed as follows:1. Select the "Activated" checkbox.2. Specify the upper and lower limits. Enter the respective values in the"Lower CAN ID" and "Upper CAN ID" input fields.3. Click the [Write] button.Pos : 87 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
