52 Configuration and Parameterization WAGO-I/O-SYSTEM 750750-658 CAN GatewayManualVersion 1.2.0, valid from FW/HW-Version 01/01Parameters in the “Select Data” DialogTable 24: Parameters in the “Select Data” DialogCheck Box DescriptionConfiguration If the checkbox is selected, the selectedparameters are automatically written tothe I/O module after loading. This notapplicable if the values to be written areidentical to the values in theapplication!Operating modeCAN parameterFilter If the checkbox is selected, the selectedparameters are loaded in theapplication.Mapping rule (input)Mapping rule (output)Write all selected data after loading intothe I/O module.If the checkbox is selected, the selectedparameters ...• “Filter”• “Mapping rule (input)”• “Mapping rule (output)”... are also written to the I/O module.Save permanently. If the checkbox is selected, allparameters are saved permanently afterwriting.Coupler/controller restarts if process image size differs!If the process image size difference between the loaded configuration andapplication, the coupler/controller restarts after writing the configuration data.Pos : 86.5 /Dokumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
