I/O Modules • 215Configuration and Parameter Setting of the ModulesWAGO-I/O-SYSTEM 750PROFINET IO5.3.7 Sytem Modules5.3.7.1 Supply Modules with 2 Bit Diagnostics StatusInstancesPNIOModule type Module type member PNIO-Data typeInput Output2DIA DIA_0 - - -2 DIA(+6 BIT I),DIA in E-PA PE_DIA_8 Unsigned 8-bitfield 1 -2DIA(+14 BIT I),DIA in E-PA PE_DIA_16 Unsigned 16-bitfield 1 -2DIA(+30 BIT I),DIA in E-PA PE_DIA_3275x-610, 75x-611Unsigned 32-bitfield 1 -* 2DIA(-2 BIT I),DIA in E-PA PE_DIA_0 75x-610*, 75x-611* - - -InputsBit allocationPNIOModule type Length[Bit] 2 7 2 6 2 5 2 4 2 3 2 2 2 1 2 0NoteD02DIA(+6 BIT I),DIA im E-PA2DIA(+14 BIT I),DIA im E-PA2DIA(+30 BIT I),DIA im E-PA2 8, 16 or 32 bits are applied in the inputprocess image of the station proxy (fieldbuscoupler) by fitting a slot with these modules.The bits 2 0 and 2 1 in the input area areassigned with the diagnostics condition ofthe physically connected supply module. Thebits 2 2 to 2 7 , 2 15 or 2 31 marked green aremade available for the input and / ordiagnostics information of the followingmodules. One byte process data qualifier(IOPS) is managed in the direction of the I/Ocontrol in the cyclic POFINET IO telegramfor these modules.D0D0▪ ▪ ▪* 2DIA(-2 BIT I),DIA in E-PA2D0The fitting of slots with this module enablesthe remaining bit locations to be previouslyfilled with input modules without bytesopened with star (bit fields) in the inputprocess image of the station proxy(fieldbuscoupler). One byte process data qualifier(IOPS) is managed in the direction of the I/Ocontroller in the cyclic PROFINET IOtelegram for these modules.
