Assembly Instructions21Spring Tension Adjustment NutLocated Under LowerSpring Hook (Not Visible)Hitch Pins Lock DeckOn Support ArmsCounterweightSpringsClip OntoBody With BodyTilted UpDeck Counterweight Spring Installation6. Raise mower body (instead of lifting the front ofdeck) and clip the counterweight springs to thereceptacle on front of body. Lower the body totension the springs. (Refer to Deck Counter-weight Spring Installation photo.)7. With the counterweight springs connected, theweight on the deck caster wheels should be15 to 25 Ib (6.8 to 11.3 kg); this adjustment ispreset at the factory. If required, the spring ten-sion can be adjusted by tightening or looseningthe elastic stop nuts located underneath thelower spring hook, or contact your local dealerif additional help is required. Refer to DeckCounterweight Spring Installation photo.