Wood Stone WS-FD-9660-L-IR-CL Installation And Operation Manual

199660 & 11260 Fire Deck Coal-Fired OvenInstallation and Operation ManualGAS AND ELECTRICALAn ongoing program of product improvement may require us to changespecifications without notice. FD-9660-CL, FD-11260-CL,Revised November 2015. Doc no: M0044.03info@woodstone-corp.com or visit woodstone-corp.comWood Stone Corporation1801 W. Bakerview Rd.Bellingham, WA 98226 USAToll Free 800.988.8103Tel 360.650.1111Fax 360.650.1166ELECTRICALPOWER CONNECTION TO THE OVENProvide a 120 VAC, 15 A circuit to the terminal strip, located in the transformer junction box located beneath the oven (Note: Thesemodels are open beneath the oven)� The terminal strip is labeled L, N and G (Line, Neutral and Ground, respectively�)Electrical diagrams are shown in the ELECTRICAL DIAGRAMS section of this manual� They can also be found beneath the oven onthe transformer plate�ELECTRICAL CODE LIMITATIONSElectrical Grounding: This appliance must be electrically grounded in accordance with local codes, or in the absence of localcodes, with the National Electrical code, ANSI/NFPA 70 or the Canadian Electrical Code, CSA C22�1 as applicable�GAS REQUIREMENTS FOR 9660 AND 11260GAS / COAL-FIRED MODELSNote: “L” or “R” in model number reflects the location of the radiant flame burners� Coal will burn on the opposite side�ModelsUnderfloor Infrared (IR) BurnerLeft SideFlame BurnerRight SideFlame BurnerNatural Gas (NG)Liquid Propane (LP)MaximumGasBTU/hr InputValve OutletPressure(W.C.)SV-1SV-2WS-FD-(9660 and 11260)-RFG-L-IR-CL (Coal) 1 1 NG 225,000 3�5" 5"LP 225,000 9" 10"WS-FD-(9660 and 11260)-RFG-R-IR-CL (Coal) 1 1 NG 225,000 3�5" 5"LP 225,000 9" 10"