Wood Stone WS-FD-9660-L-IR-CL Installation And Operation Manual

79660 & 11260 Fire Deck Coal-Fired OvenInstallation and Operation ManualINSTALLATION CASTERSAn ongoing program of product improvement may require us to changespecifications without notice. FD-9660-CL, FD-11260-CL,Revised November 2015. Doc no: M0044.03info@woodstone-corp.com or visit woodstone-corp.comWood Stone Corporation1801 W. Bakerview Rd.Bellingham, WA 98226 USAToll Free 800.988.8103Tel 360.650.1111Fax 360.650.1166INSTRUCTIONS FOR INSTALLING AND REMOVING OPTIONAL INSTALLATION CASTERS1. Use a forklift to raise the oven�Once the casters are installed, lower the oven� It may then be rolled over a FLAT surface to its final destination�3. Once in place, use two jacks to lift the left sideof the oven� Place one jack under each casterassembly on the left side of the oven� Raise theoven just high enough so the wheels clear thefloor� Unbolt each caster and remove it�4. Lower the oven back to the ground� Remove theself-tapping screw and slide the rest of the casterassembly out of the fork pocket� Repeat steps 3and 4 for the right side of the oven�Caster bolts2. Insert a caster assembly into each of the sidefork pockets and secure it to the oven with aself-tapping screw and washer� Install the screwthrough the mounting tab�DANGER: The Fire Deck 9660 weighs 6,000 lbs. and the Fire Deck 11260 weighs 6,800 lbs. Do not attempt to move theoven over any type of grade or sloped surface. Failure to follow these instructions may result in severe injury or death.BE SAFE. If you have any questions call Wood Stone at 800.988.8103.NOTE: The casters will add 3" to the total height of the oven, for a total of 82-1/2".