X Craft x plus one Operation Manual
                                       | |
Contents
| 
Pg. 6 v.1.14. Checklistsa) Normal OperationPreflight Checklist1. Check that the pylons are properly installed onto the wing2. Check for loose parts or wires3. Check foam and plastic components for signs of damage4. Propellers are tight and installed to rotate in the proper direction5. Battery fully charged6. Battery installed, power not connected7. Battery hatch secured8. Center of Gravity (CG) is within tolerance9. Payload is within maximum allowable weight limitBefore Takeoff1. Transmitter on2. Transmitter charged3. Correct flight mode selected4. Area free of obstructions 10 ft. around craft5. No obstructions overhead6. Connect battery7. Connect ground station (optional)8. (Platinum option) Press and hold safety switch9. Arm motors10. Check motor directionTakeoff1. Increase throttle to climb2. Climb vertically to 15 ft3. Check control response4. Proceed with flightBefore Landing1. Check landing area for obstructions2. Fly to landing site3. Transition to hover4. Descend to 50 ftLanding1. Descend vertically at a reasonable rate2. Adjust position during descent to land at desired location3. Reduce throttle to minimum after touchdown4. Disarm motors |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine