X Craft x plus one Operation Manual
                                       | |
Contents
| 
v.1.1 Pg. 136. BatteryCharging the Battery1. Connect charger power cord and plug the charger into wall outlet.2. Check that blue lights flash on charger.3. Plug the battery balance cable into the middle port of the charger. It is the only port that will fit that size plugand it only goes in one way to ensure an easy connection.4. Determine how charged your battery is by the light up indicators on the charger.5. When fully charged, unplug the battery from the charger and the charger from the outlet.Connecting the Battery1. Install battery by facing the battery wires down and running the cable along the length of thebattery compartment, underneath the battery (see picture). Connect power to the craft bymatching the yellow ends of the both power cords together. The power cords will connect oneway. The battery balance cable is left loose.batterybalancecablepowercord |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine