X Craft x plus one Operation Manual
                                       | |
Contents
| 
Pg. 28 v.1.1INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITYAND FITNESS FOR A PARTICULAR PURPOSE. THE PURCHASER ACKNOWLEDGES THAT THE PURCHASER ALONEHAS DETERMINED THAT THE PRODUCT WILL SUITABLY MEET THE REQUIREMENTS OF THE PURCHASER’SINTENDED USE. THE EXTENT OF XCRAFT’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR ORREPLACEMENT AS PROVIDED ABOVE, AND IN NO EVENT SHALL XCRAFT’S LIABILITY EXCEED THE PURCHASEPRICE PAID BY PURCHASER FOR THE X PLUSONE PRODUCT.b) AccessoriesThe above limited warranty in Section 8.1 only extends to the X PlusOne unit accompanying this Manual anddoes not extend to the radio controller, camera or any other accessory sold or provided with the X PlusOne (ifapplicable). The radio controller, camera and any other accessories sold or provided with the X PlusOne (ifapplicable) each have separate manuals or documentation that may or may not include warranties for suchaccessory. Any representations or warranties provided for in those manuals or any associated documentationare not representations or warranties made by XCraft, and in no case shall any such representations orwarranties extend to XCraft or the X PlusOne.c) Limitation of LiabilityXCraft’s total maximum aggregate liability for damages relating to the sale and operation of the X PlusOneproduct shall not exceed the purchase price paid for the product. In no event shall XCraft be liable for, andpurchaser and all operators of the product waive and release any claim (in contract, tort, breach of statutoryduty or otherwise) against XCraft for, any and all indirect, special incidental or consequential damages as well asany and all lost revenues, profits or prospective economic or non-economic advantage (whether direct orindirect).d) IndemnificationPurchaser and each operator hereby agrees to indemnify, save and hold XCraft and its officers, directors,shareholders, agents, and employees harmless from any and all damages, injuries or any other loss which iscaused by the acts or omissions of purchaser or any operator of the X PlusOne, regardless of whether basedupon negligence, strict liability in tort, breach of warranty or other theory of recovery or any other cause ofaction.e) SoftwareThe software included in this X PlusOne unit contains copyrighted software that is licensed in its entirety underthe GPLv3. You may obtain the complete Corresponding Source Code for the software from XCraft for a periodof three years after the last shipment of this product and/or spare parts therefore, which will be no earlier than2015-11-19, on XCraft Enterprise’s website at http://xcraft.io. The licensed software contained herein wasmodified by XCraft Enterprises, LLC on 2015-10-15. Future updates to the Corresponding Source Code will beprovided on XCraft Enterprise’s website with corresponding installation information. NOTWITHSTANDING THEFOREGOING, ANY MODIFICATION OF THE SOFTWARE INCLUDED IN THIS X PLUSONE BY PURCHASER OR ANYONEOTHER THAN XCRAFT WILL EFFECTIVELY VOID ANY AND ALL WARRANTIES CONTAINED HEREIN. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine