X Craft x plus one Operation Manual
                                       | |
Contents
| 
v.1.1 Pg. 75. Disconnect ground station if connected6. (Platinum option) Press and hold safety switch7. Disconnect connector and remove battery8. Turn transmitter offPostflight1. Check battery for overheating, or expansion2. Check motors for overheating3. Check airframe for damage or loose/missing componentsAutonomous Flight1. Perform Preflight check2. Perform Before Flight check3. Switch flight mode to “Auto”4. Increase throttle to begin mission5. Monitor aircraft visually6. If necessary engage manual control by switching flight modea. Stabilize craftb. Return to Auto mode at pilot’s discretion7. Once craft lands, reduce throttle to minimum8. Disarm motors9. Disconnect ground station if connected10. Disconnect and remove battery11. Turn transmitter offb) EmergencyLost Link1. Check controls2. Check flight mode3. Set throttle to half4. Touchdown, set throttle to minimum5. Retrieve aircraftControl Failure1. Check controls2. Check flight mode3. Set throttle to minimum4. Retrieve aircraftBird Attack1. If flying autonomously, engage manual control2. Attempt to evade bird by making abrupt attitude changes3. If attack continues, land4. If attack stops, continue with flight |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine