< cut top 2" cut 1">DIIIIIIIIHHHHHHHHIIIIIIIIIIIIIAppendix B B-1POWER CORD REQUIREMENTSThe power cord you received with your printermeets the requirements of the country where youpurchased the product. If you use the printerin another country, you must use a power cordthat meets the requirements of that country.For more information on power cordrequirements, contact your Xerox equipmentsupplier.The following information explains therequirements for power cord selection.General Information1. The cord must be approved for the countrywhere it will be used.2. The appliance coupler (that is, theconnector to the device itself, not thewall plug) must have a configuration formating with a EN 60320/IEC 320 applianceinlet (Standard Sheet C14).3. The length of the cord set must be asfollows:Minimum 6.50 ft. (2.0 m)Maximum 9.75 ft. (3.0 m)U.S. and Canada1. The cord must be UL-Listed and CSA-XEROX 4219/MRP Mid Range Systems PrinterXEROX 4215/MRP Mid Range Systems Printer