< cut top 2" cut 1">DIIIIIIIIHHHHHHHHIIIIIIIIIIIII2-32Using the Control PanelThe parity on the printer should match thesetting on your host computer. The settingsfor parity are: Odd, Even, or None.*None isthe factory default.DTR Polarity The Data Terminal Ready (DTR)Polarity menu item allows you to select whetherthe DTR line on the serial interface is high orlow when the printer is ready to receive data.The host setting must match the printersetting.*High is the factory default.PRINTER CONFIGURATIONOnce the physical components of the printer areconnected, the printer software may need to beset up, or configured, to meet the needs ofyour office. By configuring your printer, youare establishing your own default settings.These settings remain unchanged even through apower off and on cycle.Some of the printer configuration options dealwith the print functions, such as:F Printer languageF Tray selectionF PCL 5 font and page format settingsF Print resolutionF Automatic printing of the Start Page atXEROX 4219/MRP Mid Range Systems PrinterXEROX 4215/MRP Mid Range Systems Printer
