Xerox 4520 User Manual

Contents

T r a n s p o r t i n g t h e P r i n t e rC h a p t e r 6 : M a i n t a i n i n g t h e P r i n t e rv 6-15When transporting the printer more than a short distance,follow the guidelines shown in Figure 6.1.Figure 6.1 Hints for transporting the printerHelpful Hints for Moving the PrinterUse the original shipping box and materials. If the original box ormaterials are not available or are unusable, use a sturdy packing box anda generous amount of cushioning or packing material.1. Remove the EP cartridge and pack it in sturdy, light-proof material.A sealed bag is recommended to prevent toner leakage.2. Remove and/or pack any optional feeder such as theMBF, HCF, or HCEF. If possible, use the original packing cartons.3. Remove and pack the Single-sheet Bypass Feeder (SBF).4. Remove and pack the upper, middle, and lower paper trays.5. Remove and pack the front output tray.6. Remove and pack the top output tray wire guide.7. Disconnect and pack the printer. Remove and pack all printer cables.If the printer is on a network, refer to your network software guideor consult with your network administrator before disconnecting thenetwork cable.8. Disconnect and pack the power cord.9. Locate and pack all documentation for the printer.10. Place the printer, accessories, and documentation in theoriginal box or in a similar box.To avoid damaging the printer, always lift it from thebottom at the sides. Never use the paper source opening.Due to its weight, you are strongly advised to get helplifting the printer.11. Make sure packing materials will inhibit breakage and jarring.Transportingthe Printer!CautionWUG-CH06 Page 15 Black,Red,Cyan Sunday, January 22, 1995 8:38 PM