REPLACING THE CLEANER BRUSH AND BLADE PERFORMING ROUTINE MAINTENANCEPage 8-18 Xerox 495 Continuous Feed Duplex Printer Operator GuideReplacing the cleaner brush and bladeThere is a counter linked to the cleaning brush and blade life. An ErrorCode 0A-03 or 0A-04 is automatically displayed when the counterreaches its theoretical replacement value.CAUTIONKeep toner away from your eyes or mouth. If the toner gets on your skinduring replacement, immediately wash it off. Prolonged inhalation ofexcessive amounts of toner particles may cause lung damage. If thisoccurs, consult a doctor immediately.Note: If you should get toner on your clothes, brush it off and wash theitem in cold water. DO NOT use hot water or dry cleaning as this maymake the mark permanent.Replacing kit A[R3a]To replace cleaner brush and blade kit A[R3a], proceed as follows:1. Press the button to switch to the consumables view whichshows the usage of all consumables and press the Change buttonbeside Kit A[R3a] in the Front box.The consumables replacement screen for Kit A[R3a] will bedisplayed.2. Open the right and left printer doors.3. Check that the Kit A[R3a] LED is flashing.4. Open the internal door.5. Loosen the two thumbscrews at cleaner brush cover A[R3a].Drum Unit AThumbscrewsCleaner Blade ACleaner Brush Cover A[R3a]
