PAPER PATH PAPER LOADINGXerox 495 Continuous Feed Duplex Printer Operator Guide Page 5-3Paper LoadingPaper loading is a two-stage procedure.1. The paper is loaded on the hopper.2. The paper is autoloaded.Loading on the hopperTo load paper in the hopper:1. Remove the paper from the printer (see "Removing Paper" on page5-12).2. Check that the stacker components are in the following state:• There is no paper left on the stacker table and the Table Autoswitch is set.• The paper tension lever is set at a suitable position for the newpaper.• The paper output lever is correctly set.3. For paper supplied from a box, place the paper box under the hopperand press it against the paper box guides.• Turn the knob on the right-side guide to loosen it.HopperPaper Box GuidePaper BoxPaper Box GuidePaper Paper Registration PositionRight SideGuideKnob
