Page A-2 Xerox 495 Continuous Feed Duplex Printer Operator GuideElectrical supplyThis product should be operated from the type of electrical supplyindicted on the data plate label located on the rear cover of the powersupply/transformer provided with the equipment. If you are not sure thatyour electrical supply meets the requirements, please consult your localpower company for advice. The transformer provides 200V ac, 50 Hz, 3phase as specified on the data plate of your Xerox 495 equipment.WARNING: This product must be connected to a protective earthcircuit.Operator accessible areasThis equipment has been designed to provide operator access to safeareas only. Operator access to hazardous areas is restricted usingcovers or guards, which require a tool to enable removal. Never removethese covers or guards. Please observe all warnings provided in accessareas.MaintenanceAny operator maintenance procedures will be described in the customerdocumentation supplied with the product. Do not to carry out anymaintenance on this product, which is not described in the customerdocumentation.Cleaning your productBefore cleaning, please switch off the equipment and turn off the breakeron the distribution panel. Always use materials specifically designated forthis product, the use of other materials may result in poor performanceand may create a hazardous situation. Do not use aerosol cleaners, theymay be explosive and flammable under certain circumstances.
