EJECTING PAPER FROM THE PRINTER PAPER PATHPage 5-2 Xerox 495 Continuous Feed Duplex Printer Operator GuideEjecting paper from the printerEjection can take place using either of the Eject buttons on the action barat the bottom of the touch screen. In addition, you can eject paper usinga selection from the bubble menu associated with a device.The Eject button only works for the device from which the eject isrequested and affects the whole print line. The possibilities are:Note: To switch between the multi page and infinite eject states, pressthe button for a few seconds until the button changes to the state thatyou require.The bubble menu possibility is Release which is available for any papermaster device on the line and will move sufficient paper to clear the printline from that device onwards. Therefore, if you choose Release from theUnwinder bubble menu, all the paper in the print line will be moved. Youcan release paper by pressing the appropriate icon on the print line andchoosing Release from the bubble menu.The Eject one page button moves the paper on by one sheet for each press.The multi page eject button moves the paper on by the number of sheets dis-played (30 in the illustration) for each press.The number of pages to be ejected when the button is pressed will be thedistance between devices determined at installation.The infinite eject button will continue to eject paper until the STOP button onthe touch screen is pressed, even if the stacker is not ready or full.
