FUNCTIONAL SPECIFICATIONSXerox 495 Continuous Feed Duplex Printer Operator Guide Page B-3Functional specificationsThe following table lists the functional specifications of this printer.Item SpecificationBasic resolution (switchable) 240x240dpi, 300x300 dpi or 600x600dpiEmulation IPDS onlyPrintable area See "Valid print area (VPA)" on page 7-37 for detailsPre- and post-processing The printer provides a connector with a standard interface for pre-and post-processing.Environments AFP under PSF/MVS, PSF/VM, PSF/VSE, PSF/400, PSF/OS2, PSF/6000, PSF/AIX, IPDS and InfoPrintManagerOptions IBM S/370 parallel channel and /or Two Channel Switch (TCS), extra:IBM S/370 parallel channel ESCON connection via a converter (e.g.IMB 9034). Additional pre-/post-processing through the PLB interfacePatrol lamp See page 8.Sound level 70 dBA max.Ambient temperature Operating: 59°F to 89.6°F (15°C to 32°C)Non-operating: 32°F to 95°F (0°C to 35°C)Relative humidity 40 to 70% RH20 to 80% RHMaximum wet bulb temperature 78.8°F (26°C) (without condensation)Recommended dust condition 0.168mg/cubic-meter
