Repacking the Printermagicolor 6100 DeskLaser User's Guide7-4Repacking the PrinterIf you need to relocate or ship your printer after it’s been installed, follow the proce-dures in this chapter to prevent damage to the printer and to keep your warranty valid.» Note:We strongly suggest that you save the packaging materials in case you everneed to move or ship the printer. If you’re returning the printer for service, you don’tneed to return the accessories, cabinet, cleaning roller, documentation, fuser oilbottle, interface cables, media tray(s), power cable, or toner cartridges. Caution: Never lift a printer with the fuser oil bottle installed. To avoid tonercontamination during shipment, leave the OPC belt cartridge installed.MINOLTA-QMS cannot be held responsible for damage to your printer during shipmentthat results from the improper packaging of your printer. You must use the instructionsgiven in this section before repacking the printer in its original shipping carton with theoriginal packing materials. Original shipping cartons are secured to a pallet usingdisposable banding and buckling supplies. These supplies must be replaced prior toshipping the printer.If you need replacement packaging, in the United States, call MINOLTA-QMS Sparesat (251) 633-4300 x2530 and request catalog number 2600439-500. For locationsoutside the United States, refer to theService & Support Guide or www.minolta-qms.com. If you return the printer for service, be sure to write the RMA (ReturnMerchandise Authorization) number you received from your customer supportrepresentative on the outside of the carton before shipping the printer.If the printer is not strapped to the pallet or if the RMA number is notclearly visible onthe outside of the return inventory, we will not accept receipt.You can also have a MINOLTA-QMS authorized service provider uninstall and repackyour printer. For prices and availability, call 1 (877) 778-2657.What's Involved?Repacking your printer for shipment involves the following steps. Each is described inmore detail in the following sections.1 Remove the cables and media tray(s).
