Configuring the PrinterDriverPrinter Driver Configuration 2-5Windows 2000/NT 4.0 Configuration Methods» Note:If you’re using Windows 95/98, refer to “Windows 95/98 Configuration Methods”on page 2-3 for complete information.There are three methods you can use to configure the printer driver. However, thesethree methods don’t all have the same options or control.... via the printer driver properties ... via your application’s printer setupGives you access to the General, Ports,Scheduling (Windows NT 4.0) or Advanced(Windows 2000), Sharing, Security, and AbouttabsGives you access to the Paper, Page Layout,Image, Device Option, and About tabsLets you assign the printer settings for all printjobsLets you assigns the printer settings only forthe current print jobRetains your settings until changed again viapropertiesTemporarily overrides the existing defaultdocument settingsHow To:1 From the Windows Start menu chooseSettings.2 Choose Printers.3 Select the magicolor 6100 DeskLaserprinter driver.4 From the File menu, choose Properties.5 Make your selections, and then chooseOK to save your changes.6 Close the Printers window.How To:1 From the application’s File menu choosePrint (or, in some cases, Print Setup orPage Setup).2 In the Print, Print Setup, or Page Setupdialog box, select the magicolor 6100DeskLaser printer driver.3 Choose the Properties button.4 Make your selections, and then chooseOK to save your changes.5 Choose OK from the Print Setup window.... via document defaults (Windows NT 4.0) or via printing preferences (Windows 2000)Gives you access to the Paper, Page Layout, Image, Device Option, and About tabsLets you assign the default printer settings for all print jobsRetains your settings until changed again via properties
