Selecting the Crown Portmagicolor 6100 DeskLaser User's Guide2-2IntroductionThe magicolor 6100 DeskLaser printer driver is for use with Windows 95/98/2000 andNT 4.0 operating systems. This chapter describes how to configure the printer driverand the Crown Print Monitor. We’ve also included information about using theMINOLTA-QMS Printer Status Monitor.Selecting the Crown PortIf you installed the Crown Print Monitor, follow the instructions in this section to assignthe new Crown port that was created.1 From the Start menu, choose Settings.2 Choose Printers.3 In the Printers window click the rightmouse button on the magicolor 6100DeskLaser printer to display theprinter’s menu.4 Choose Properties.5 Choose the Details tab (Windows 95/98) or Ports tab (Windows 2000/NT4.0).6 From the Print To The Following Portlist, choose the Crown port that wasadded during the Crown Print Moni-tor installation.7 Choose OK to close the PrinterProperties window.8 Close the Printers window.
