Using Media Other ThanPapermagicolor 6100 DeskLaser User's Guide3-10Using LabelsLoading and Printing Labels1 In the printer driver (Paper tab, Media Type option), select Thick Stock.2 Remove the upper media cassette from the printer (and remove any mediain the cassette).3 Load the new media.» Note:If your label stock has a top-of-page, place the top-of-page toward the rightside of the cassette.4 Slide the upper media cassette back into the printer.5 In the printer driver (Paper tab, Media Type option), select Thick Stock.Formatting Format label data within your application. Try printing your data on a plainsheet of paper first to check placement.Input Cassette Standard upper cassette onlyCapacity Up to 50 sheets, depending on the thickness of the labelsType Use only labels recommended for laser printers, such as Avery 5260.Weight 24–42 lb (90–157 g/m²)Print Mode Thick StockNotes Adhesive label stock in sizes letter or A4. A label consists of a face sheet (the printing surface), adhesive, and acarrier sheet— The face sheet must follow to the plain paper specification listed on“Paper Specifications” on page 3-4.— The face sheet surface must cover the entire carrier sheet, and noadhesive should come through on the surface. Exposed adhesivesmay stick to the transfer drum or the fixing roller, causing labels to peeloff and media jams to occur.— The adhesive and carrier sheet must withstand the fusing temperature(392° F/200° C). Check your application documentation for other information on printinglabels.
