2-2 IPDS User GuideInstallation and Setup• Select Go Online and Go Offline.• Select Stop or Continue.• Restart IPS GatewaySystem Administrator: The system administrator requires apassword and can perform the same functions as the Operator.Additionally, the system administrator can:• Capture or replay a Trace file.• Load, print, or delete resident fonts.Licensing RequirementsThe Xerox FreeFlow® Print Server IPDS feature must be licensedin order for it to function.Your local Xerox representative provides licenses prior toinstallation. The Xerox service representative enters the licensestring and expiration date for each license, immediately followingthe software installation.Defining the Target Queue in the Print ServerAt least one queue must be created on the Xerox FreeFlow® PrintServer for processing the IPDS data. Queues used for IPDS mustbe defined as streaming queues. Refer to the Xerox FreeFlow®Print Server on-line help for details on creating a streaming queue.Setting System PreferencesThe system behavior for jobs or sets that exceed the capacity of afinisher can be selected in the System Preferences dialog. Toreach this dialog, select [System Preferences] from the Systempull-down on the main GUI. Select the Job Policy tab. UnderOver Limit Finishing, check Print Job Unfinished. If the [Fault Job]or [User Intervention] option in the Over Limit Finishing panel areselected, when an over limit finishing situation is encountered, theprinter informs the host that a printer fault is raised andintervention is required. This causes the host to stop sending data.In these cases, it is typically necessary to terminate the job at theprint server. However, terminating the job at the print server doesnot clear it from an IPDS host output queue, and the host willretransmit the data unless the job is also terminated at the host.NOTE: The Xerox FreeFlow® Print Server IPDS does not supportXerox FreeFlow® Print Server Remote Workflow.