116 Phaser 6200 Color Laser Printer - Service ManualResetting network setup values to defaultResetting the network setup values resets the TCP/IP address, TCP/IP address menusettings (gateway, broadcast, etc.), CentreWare IS, EtherTalk, Netware, set IPX frametype, IPP and Ethernet speed to their default values.1. From the Main Menu, highlight Network Setup Menu and press OK.2. Highlight Reset Connection Setup and press OK.3. Reset Connection Setup NOW is displayed, press OK.Caution Make note of the current network settings or Print aconfiguration page to reference the customers currentnetwork settings prior to resetting the network setup to thefactory default values.Resetting All Printer Default Settings (PostScript NVRAM)Resetting the NVRAM restores all printer values stored in the IP controller NVRAMincluding network, printer setup, job defaults, color, margin, and calibrations to theirfactory default values. The print counts and the Adobe firmware serial number are notaffected by this reset1. From the Main Menu, highlight Support and press OK.2. Highlight Service Tools Menu and press OK.3. Reset NVRAM is displayed, press OK.4. Highlight Reset NVRAM and Reset Printer NOW and press OK to reset all thesettings to their factory default values.Service Diagnostics PostScript NVRAM ResetsResetting the NVRAM restores all printer values stored in the IP controller NVRAMincluding network, printer setup, job defaults, color, margin, and calibrations to theirfactory default values. The print counts and the Adobe firmware serial number are notaffected by this reset.1. Enter Service Diagnostics.2. Highlight NVRAM Access and press OK.3. Highlight PostScript NVRAM Reset and press OK.4. Resetting NVRAM! Are you sure? Is displayed , highlight Yes and press OK.The printer now exits Service Diagnostics and reboots. While booting, NVRAM isreset.
