PrintingSystem Guide5-6Common ControllerSocket Gateway Configuration Utility: setVPSoptionOn the DocuSP gui, gateways can be configured using theSetup pull down menu. Selecting [Gateways] from the Setupmenu opens a window with the various gateway tabs available.The following describes how to configure the gateways withoutusing the DocuSP.This utility allows you to configure the two ports of the SocketGateway to either remove the echo commands (VPS) or leavethe data unaltered (NONVPS).If you are a DT61xx or DT65/75/90 non-LCDS customer,configure both ports as NONVPS. DP1xxxEPS and DT 75/90customers using LCDS need to decide whether to configure oneor both ports as VPS. If a port is not being used, it isrecommended to set the port to NONVPS.The Socket Gateway allows two ports to be configured at onetime. Regardless of the port number assigned on the SocketConfiguration Utility, the socket port configured on the first portwill always be Port 1, and the second line is always Port 2. Bothports will are set as VPS upon installation.Syntax of the utility:setVPSoption -10 - Specifies Port 11 - Specifies Port 2option -VPS(default) or NONVPSAn example of the utility is as follows:docusp_printer% su rootPassword:# cd /opt/XRXnps/bin# ./setVPSoption -1VPS -2NONVPSThis sets Port 1 as VPS and Port 2 as NONVPS)# ./setVPSoption -1VPSThis sets Port1 as VPS and leaves Port 2 unaltered.# ./setVPSoption -2NONVPSThis leaves Port 1 unaltered and sets Port 2 as NONVPS.Restart the DocuSP software after setting this option.
