Troubleshooting System Guide9-16 Common ControllerConfiguring XJDC/UnixThe configuration file, CONFIG.TXT found in the directory /opt/XRXnps/bin/, contains default parameters for the invocation ofXJDC. The text file can be edited using any simple text editor.The first line of the configuration file must not be edited; itcontains XJDC version information. Each subsequent linecontains a single option; any text following the first word, and anyinvalid options, are ignored. Options may be repeated orcontradicted on following lines; the last option specified overridesprevious options. The following sample configuration file isprovided:XJDC VM10 PDL CompilerREPLACENODISPLAYPRINTTRUNCATELABELCOMPILESINGLEBYTEVM10PAPERSIZE=USLETTERDATE=USPAGINATE=60OUTPATH =/opt/XRXnps/resources/lcdsXJDC Hints and Tips• If the config file needs to be changed, modify the /opt/XRXnps/XRXXJDC/data/CONFIG.TXT file. Otherwise, thedefault setting in the CONFIG.TXT file will take effect.• An example for the syntax /opt/XRXnps/bin/XJDC filenamewould be: /opt/XRXnps/bin/XJDC /home/XDJCtest/BASIC.JSL where the filename is represented by /home/XJDCtest/BASIC.JSL• The output files are stored under the OUTPATH directorywhich is specified in either /opt/XRXnps/bin/CONFIG.TXT fileor command line. For example, if OUTPATH is /opt/XRXnps/temp/, then all the output files are put in the directory of /opt/XRXnps/temp.
