Copying126 Xerox ® WorkCentre® 7800/7800i Series Color Multifunction PrinterUser Guide6. To insert a Bates Stamp:a. Touch Bates Stamp > On.b. Touch the Starting Page Number field, then use the alphanumeric keypad to enter thestarting page number. Leading zeros can be included.c. Touch Apply To, then select an option.d. Under Stored Prefixes, touch an existing prefix in the list.Note: To create a prefix, touch a blank row, use the touch screen keyboard to type up to eightcharacters, then touch OK.e. Under Position, touch an arrow to position the Bates Stamp in the header or footer. The samplepage shows the location of the Bates Stamp.f. Touch OK.g. To change the text formatting, touch Format & Style, choose the desired settings, then touchOK.7. Touch OK.Adding Transparency SeparatorsYou can add blank sheets of paper between each printed transparency. The size and orientation of theseparators must be the same as the transparencies.Notes:• If Booklet Creation is enabled, you cannot select this feature.• To use this feature, ensure that transparencies are loaded and available for selection.• If Paper Supply is set to Auto Paper Select, the Paper Conflict screen appears.To add transparency separators:1. Press the Services Home button, then touch Copy.2. Touch the Output Format tab, then touch Transparency Separators > On.3. For Separator Supply, touch the tray that contains the paper to use for the separators. If the traythat contains the separator paper does not appear, touch More, touch the desired tray, then touchOK.4. For Transparency Supply, touch the tray that contains the transparencies. If the tray that containsthe transparencies does not appear, touch More, touch the desired tray, then touch OK.5. Touch OK.
