SafetyXerox ® WorkCentre® 7800/7800i Series Color Multifunction Printer 13User GuideElectrical SafetyRead the following instructions carefully before operating your printer. Refer to these instructions toensure the continued safe operation of your printer.Your Xerox ® printer and supplies are designed and tested to meet strict safety requirements. Theseinclude safety agency evaluation and certification, and compliance with electromagnetic regulationsand established environmental standards.The safety and environment testing and performance of this product have been verified using Xerox ®materials only.Note: Unauthorized alterations, which can include the addition of new functions or connection ofexternal devices, can affect the product certification. For more information, contact your Xeroxrepresentative.Power Cord• Use the power cord supplied with your printer.• Plug the power cord directly into a properly grounded electrical outlet. Ensure that each end of thecord is connected securely. If you do not know if an outlet is grounded, ask an electrician to checkthe outlet.• Do not use a ground adapter plug to connect the printer to an electrical outlet that does not have aground connection terminal.WARNING: Avoid the potential of electrical shock by ensuring that the printer is grounded properly.Electrical products can be hazardous if misused.• Verify that the printer is plugged into an outlet that is providing the correct voltage and power.Review the electrical specification of the printer with an electrician if necessary.• Do not place the printer in an area where people can step on the power cord.• Do not place objects on the power cord.• Replace the power cord if it becomes frayed or worn.• Do not unplug or plug the power cord while the printer is turned on.• To avoid electrical shock and damage to the cord, grasp the plug when unplugging the power cord.• The electrical outlet must be near the printer and must be easily accessible.The power cord is attached to the printer as a plug-in device on the back of the printer. If it is necessaryto disconnect all electrical power from the printer, disconnect the power cord from the electrical outlet.For details, see Turning the Printer On and Off on page 39.
