Installation and Setup42 Xerox ® WorkCentre® 7800/7800i Series Color Multifunction PrinterUser GuideModifying General SettingsYou can modify printer settings such as the language, date and time, units of measurement, displaybrightness, and startup page from the control panel.Note: If these settings do not appear, contact the system administrator or log in as a systemadministrator. For details see Logging In as the System Administrator at the Control Panel on page32.1. At the printer control panel, press the Machine Status button, then touch the Tools tab.2. Touch Device Settings > General, then touch the setting you want to change:− Energy Saver: This option specifies when the printer goes into energy-saving mode.− Date and Time: This option allows you to set the time zone, date, time, and display format.− Language/Keyboard Selection: This option allows you to set the language and keyboardlayout.− Custom Keyboard Button: This option allows you to assign text to the custom key on thevirtual keyboard.3. Touch OK.
