5 Troubleshooting102 8265/8290/8365/8390 User Guide5.3.5 Error Requiring a Printer RestartFollowing are descriptions and solutions requiring a restart. Errors requiring a restart are displayed whenthe following fatal error has occurred during printer operation.• Foreign material disturbing the printer operation is involved in the printer.• An electrical circuit (such as board, motor, or sensor) failure has occurred.• An error on the control program has occurred.If error requiring a restart has occurred, the printer prints and then stops (see below).(1) Power relating to the driving system is shut off automatically.(2) All indicator lights on the operation panel are turned on and beeps sound continuously.(3) An error message is displayed on the operation panel.Press any key on the operation panel to stop the beep sounds.If an error requiring a restart has occurred, solve the problems to restart the printer and delete the error.If the same error message is displayed again, contact your local XEROX dealer. Be sure to inquire thecode numbers of the error messages.No. Message Descriptions Solutions References1 E System error***{{{{{{{{{{[ ]An error whichcannot be solvedpromptly hasoccurred.1. If foreign materials such asa piece of media or mediadust are involved in thedriving system, remove them.2. Make sure that thereplaced parts are correctlyinstalled.3. Power OFF the printer.After 10 seconds or more,power it back ON.Refer to ‘Whenmedia jams occur ‘Refer to ‘Replacingconsumables’Notes*** In error messages are code numbers indicating what kind of error occurred.[ ] may indicate the command code of the error.For the settings on a computer, refer to the computer's operation manual.