Xerox 8290 User Manual

Contents

Xerox 8290 User Manual Manual pdf 95 page image

4 Printer Operation8265/8290/8365/8390 User Guide 87Please note that after finishing a printing job (and no other print job is sent to the printer the heatingelements will keep their temperature for approximately 6 minutes. After 6 minutes the heating elementsare powered OFF.4.4.3 Operating the Pressure RollersWhen you want to switch the up and down movement of the pressure rollers follow the steps below.Step 1 : Press the [F4] key on the operation panel.I) The printer works as follows.Status of the printer Operation after the [F4] key has been pressedThe pressure rollers have been loweredThe MEDIA SET lamp turns off.The pressure rollers are liftedThe MEDIA SET lamp will turn on (orange).The pressure rollers have been raised.The MEDIA SET lamp turns on (orange).The pressure rollers are lowered.The MEDIA SET lamp will turn off.NotesYou can also switch the up and down movement of the pressure rollers using the foot switch instead of theoperation panel.4.4.4 Print Mode CheckUse the following procedure to check the print mode currently set.Step 1 : Press the [ENTER] key on the operation panel.I) The following information is displayed on the operation panel for three seconds.Line 2Line 3Line 4No. Position Description Reference1 Line 2 The printing quality is displayed. Refer to ‘Printing quality menu’2 Line 3 The interlace method is displayed. Refer to ‘InterLace Setup menu’3 Line 4 The printing direction is displayed. Refer to ‘Printing direction menu’Step 2 : When the printing mode display closes, the product changes to its normal status.