6 Maintenance8265/8290/8365/8390 User Guide 1156.3.2 Weekly MaintenanceAt the end of the week, ink has to be removed from some parts, so it cannot harden. Otherwise, someparts will break down or result in bad print quality. After performing a weekly maintenance, do not forgetto perform the daily maintenance afterwards.6.3.2.1 Cleaning the area around the capsStep 1 : Power ON the printer.Step 2 : Go to the H.Unlock Menu and press F2.Step 3 : Open the Front Cover.Step 4 : Slide the carriage to the left to access the capping station.Step 5 : Clean the area around the caps with a poly-knit wiper. If you see ink, dust or some thing else,clean it immediately so it can not influence the print quality.Step 6 : Close the Front Cover.Step 7 : Press the [ENTER] key to exit the H.Unlock Menu. The carriage will cap in and be locked.6.3.2.2 Cleaning around the bottom of headsStep 1 : Open the left maintenance covers by removing the four screws.Step 2 : Power ON the printer.Step 3 : Go to the H.Unlock Menu and press the F2 key to unlock the carriage.
