Scanner InstallationScanner Preparation1. Prepare the Scanner for installation:2. (Figure 6-22): Ensure that the Edge Present Sensor and the EdgeRegistered Sensor actuate and deactuate freely.3. Check the Platen Glass and the Document Hold-down for damageor dirt, and clean the parts if dirt is found.Note: Use Lens and Mirror Cleaner 43P81.A.Open the TopCoverB.Remove the 2 foam padsfrom the handles on theDocument Hold-downGuide Lift out the DocumentHold-down Guide.Platen GlassEdgeRegisteredSensorEdgePresentSensorRemove the 2 paper stripsFigure 6-21. Removing the Packing MaterialFigure 6-22. Sensors and Platen Glass7356 Scanner12/976-21 Scanner Installation
