Security66 ColorQube 8700/8900 Color Multifunction PrinterSystem Administrator GuideDisplaying Your Company Logo on the Blocking ScreenYou can customize the blocking screen to display your company logo. The blocking screen appears on theprinter touch screen when card reader authentication or an auxiliary accounting device is configured. Thescreen displays a message when a user attempts to access a restricted feature, reminding users to swipean identification card to access the feature.1. On the Xerox Access Setup page, under Action, next to Import Customer Logo, click Edit.2. Click Browse or Choose File.3. Select a .png file that is not larger than 300 x 200 pixels, and click Open.4. Click Import.5. Click Reboot Machine.Configuring Xerox Secure Access Unified ID System Authentication SettingsWhen Xerox Secure Access authentication is configured, users swipe a pre-programmed identificationcard at the control panel. The printer compares the user credentials to the information stored on theXerox Secure Access server. To use Xerox Secure Access, purchase and install the Xerox Secure AccessUnified ID System.To configure access rights using Xerox Secure Access Unified ID System authentication: Install the Xerox Secure Access authentication server software and configure it with user accounts.For details, see the Xerox Secure Access Unified ID System documentation.Note: Accounts created on the XeroxSecure Access server must match accounts stored in the printerlocal database or in another network authentication server. Enable the Authentication and Accounting Configuration Web service. For details, see HTTP on page50. Format and configure identification cards. Connect your card reader to the USB Port. Configure Xerox Secure Access Setup settings. Enable Secure HTTP (SSL). For details, see HTTP on page 50. Enable the Xerox Secure Access Web service. For details, see HTTP on page 50. Configure Authorization settings. If you enabled Personalization, configure LDAP server settings.The Xerox Access Setup page in CentreWare Internet Services provides links to authentication,authorization, and personalization configuration settings.1. In CentreWare Internet Services, click Properties > Login/Permissions/Accounting.2. Click Login Methods.