Causes and ActionsYes/NoSymptomsThe document glass or the document cover is dirty.CauseYesCopies are not made atthe desired sizeIf No, go to nextsymptom.Clean the document glass or the document cover.ActionIf problem is not solved, go to next Cause/Action.The document is made of highly transparent materiallike a transparency.CausePlace a white sheet of paper on the document beforecopying.ActionIf problem is not solved, go to next Cause/Action.The document is misaligned.CauseLoad the document correctly.ActionIf problem is not solved, go to next Cause/Action.The document guides are in an incorrect position.CauseLoad the document correctly, and align the documentguides with the edges of the document.ActionIf problem is not solved, go to next Cause/Action.The document is a non-standard size.CauseEnter the document size and then copy.ActionIf problem is not solved, go to next Cause/Action.The document is folded or bent.CauseStraighten and properly reset the document.ActionPrint troubleshootingThis section describes solutions for problems encountered during printing.1. Unable to print2. The print result was not what was expected15-41Xerox® D95/D110/D125/D136 Copier/PrinterUser GuideProblem solving
