Loading paper in trays 1 and 2NoteA paper jam may occur if a tray is opened while it is being used to feed stock.1. Select the appropriate paper stock for your print job.2. Pull out the tray slowly until it stops.3. Open the ream of paper with the seam side facing up.4. Fan the sheets before loading them into the tray.5. Load and align the edge of the paper against the LEFT edge of the tray.Paper must be loaded in the Long Edge Feed (LEF)/portrait direction.6. Gently push in the tray until it comes to a stop.If enabled by your System Administrator, the Paper Tray settings screen may bedisplayed on the UI.7. If changes have been made to the paper tray, select the Change Settings button;otherwise, proceed to the next step.a) Make the desired selections for Paper Type/Paper Weight, Paper Size, and PaperColor.b) If necessary, make the desired changes to paper curl and alignment adjustment.NoteRefer to the System Administration Guide for detailed information on the papercurl and alignment adjustment options.c) Select Save until you are returned to the tray settings window.8. Select Confirm to close the window.User Guide3-2Paper and other media
