FunctionComponentNo.• This tray is standard on this finisher and is used toload paper that will be used as separators and covers.• Paper loaded here is not printed on; use this tray forpre-printed stock and for insertion into the printedoutput. (This tray is also known as the Interposer).• Tray 8 holds a maximum of 200 sheets when using20 lb./75 gsm paper.• Paper can be loaded in the LEF or SEF direction.Post-process inserter (Tray8/Tray T1)2Collects the scraps from the puncher. Open to removethe scraps.Punch scrap container3Contains staples; remove this cartridge to replace staplesand clear staple jams.Staple cartridge4Container for staple waste; remove this container whenfull.Staple waste container5The Top Tray is used for stacked output, and can receiveup to 500 sheets of 20 lb./80 gsm paper. Copies aredelivered here when specific output features are selected,such as Automatic sorting, Collated, Uncollated, orNormal.Top tray6The Stacker Tray is used for offset and/or stapled output,and can hold up to 2000 sheets of 20 lb./80 gsm paper.This tray also receives copies when you punch and Z-foldcopies.NoteBoth the Top and Stacker Trays can be used for holepunched output (optional).Stacker (middle) tray7Open to clear paper jams, replace staples, clear jammedstaples, or remove the scraps from the puncher.Right cover8The optional Folder tray receives copies when you selectC-folding or Z-folding of 8.5 x 11 in./A4 output and 11 x17 in./A3 media.C/Z-Fold output tray(optional)9Open this cover to access the machine and to clear paperjams.Left cover.10Folding featureIf your machine is equipped with the Booklet Maker Finisher and/or the C/Z Folder, youcan make prints using the folding option. The option folds your prints in half (single orbi-folding) or in thirds (C-fold or Z-fold types). The folding option is selected from theprint driver.24-3Xerox® D95/D110/D125/D136 Copier/PrinterUser GuideStandard Finisher Plus
