6. -1/Low/Low 1: Use this setting when you want less pressure applied to the spine ofthe booklet. The less pressure applied to the booklet, the more rounded the bookletspine will be.7. -2/Lower/Low 2: Select this setting when your finished booklet is five pages or lessand on lighter weight paper (100 gsm or lower). -2 is the least amount of pressurethat can be applied to the booklet.Choose the setting that best fits your needs for the booklet output.NoteYou may want to run one or more test prints before running larger jobs.The following illustration shows two different booklets: one booklet which wassquare-folded and one booklet that was not square-folded.1. This booklet was not square-folded. It has a more rounded, thicker appearance tothe spine of the booklet.2. This booklet was square-folded. The booklet spine is flattened and squared, giving itthe appearance of a perfect-bound book.Accessing the Square Fold optionsAccessing the Square Fold options for network print jobsFor network print jobs, the Square Fold feature and its related options can be accessedeither from your computer’s print driver (before the job is submitted for printing or atthe print server (after the job is submitted for printing). To access the Square Foldfeature/options for network print jobs, perform the following:1. For jobs being sent from your computer, continue to the next step.• For jobs already at the print server, continue to Step 3.2. From your computer, open the desired job in its appropriate application (for example,Microsoft Word or Adobe Reader).a) Select File and Print.Xerox®D95/D110/D125 Copier/Printer22-6User GuideSquareFold Trimmer Module
