6. Adjust the paper guides by pressing in the guide release and carefully moving theEdge Guide until it lightly touches the edge of the material in the tray.Do not load materials above the MAX line located on the rear Edge Guide.7. Gently push in the tray until it comes to a stop.If enabled by your System Administrator, the Paper Tray settings screen may bedisplayed on the UI.8. If changes have been made to the paper tray, select the Change Settings button;otherwise proceed to the next step.a) Make the desired selections for the Paper Type/Paper Weight, Paper Size, andPaper Color.b) If necessary make the desired changes to the paper curl and alignment adjustment.NoteRefer to the System Administration for detailed information on the paper curl andalignment adjustment options.c) Select Save until you are returned to the tray settings window.9. Select Confirm to close the window.Loading transparencies in trays 1-41. Select the appropriate paper stock for your print job.2. Pull out the tray slowly until it stops.3. Fan the transparencies to stop them from sticking together before loading into thetray.4. Load transparencies on top of a small stack of same-size paper, and align the edgeof the transparencies with the removable stripe against the LEFT edge of the traywith the side to be copied or printed on facing down.Note• Do not load more than 100 transparencies in a paper tray at one time.• Transparencies can be loaded either long edge or short edge feed (portrait orlandscape).• Do not load transparencies above the MAX line as indicated on the tray.5. When loading transparencies into either Tray 3 or 4, adjust the paper guides untilthey lightly touch the edges of the material in the tray.6. Gently push in the tray until it comes to a stop.If enabled by your System Administrator, the Paper Tray settings screen may bedisplayed on the UI.3-5Xerox®D95/D110/D125 Copier/PrinterUser GuidePaper and other media
