a) If the paper is preprinted, load the paper with the printed side facing up.b) If the media is tab stock, load the tab side to be fed first (in the direction of thearrow as shown in the above illustration).4. From the Tray Properties window, enter the correct paper information, including size,type, weight, and if necessary, decurler and/or alignment optionIf enabled by your System Administrator, the Paper Tray Properties screen may bedisplayed on the UI.5. Select OK to save the information and close the Tray Properties window.Finishing TransportFinishing Transport main componentsThe Finishing Transport is comprised of the following components:FunctionComponentNo.The Finishing Transport serves as an interface totransfer paper from the Finisher Module and theattached third-party output device..Finishing Transport1This display indicates the status of the FinishingTransport and shows the locations of any paper jams.Finishing Transport status display2Xerox®D95/D110/D125 Copier/Printer23-6User GuideStandard Finisher Plus
