5ScanFeatures for the Scanning device are explained in this section. There are various waysto scan a job as well as where the scanned output should reside when finished.Simple ScanningThe simple scanning procedure involves loading documents, selecting features, scanningthe job, and identifying where to store the scanned job.Simple Scan Procedure1. Load the documents.2. From the Services Home window, select the applicable feature.3. Press Start on the Control Panel. The print job will scan.Loading DocumentsThe following two methods are available to load documents:• Document Feeder: Single Sheet or Multiple Sheets• Document Glass: Single sheet or Bound book1. Determine which method you are going to use to load the document.2. Remove any paper clips and staples before loading a document.3. Adjust any document guides to match the size of the document loaded.4. Load the documents face up for the Document Feeder, or place the doument facedown on the Document Glass.Selecting Document Features1. Place the document in either the Document Feeder or on the Document Glass.2. Select the desired feature for the document.• Email: Scans a document and sends the scanned data as an e-mail attachmentafter converting the data to TIFF, JPEG, PDF, DocuWorks, or XPS (XML Paperspecificatio).5-1Xerox®D95/D110/D125 Copier/PrinterUser Guide
