DocuColor 240/250DocuColor 240/250 Training and Information Guide 13Control PanelThe Control Panel is divided into four areas: Touch Screen, Pathway buttons,Keypad and Feature buttons. The touch screen allows you to select all theavailable programming features. It also displays fault clearance procedures andgeneral machine information.Copy gives access to the copy screens.Job Status displays job progress information on the touch screen.Machine Status displays the current status of the machine on the touch screen.All Services allows access to the All Services screen, where different features(copy, scan, etc.) can be selected.Review provides access to the Review screen. In this screen, you can check alist of the status of copy and scan features whose settings have changed fromthe defaults.Log In/Out provides password protected access to the System Administrationmenu used to adjust the defaults of the machine.Clear All, if pressed once, resets the default settings and displays the firstscreen for the current pathway. If pressed twice, resets all the features to theirmachine default settings.Interrupt temporarily stops the current copy job to allow a priority job to be run.Stop temporarily stops the current job. Follow the message to cancel or resumeyour job.Start starts the job.# (Pound) indicates the dialing character or designates a group dial number.Clear deletes numeric values or the last digit entered.The actual touch screen will vary depending on the pathway buttons selectedand the options available on your machine. The touch screen also displaysimportant messages about the current condition of the machine, no matter whatpathway has been selected.
