6-6 Installation Planning GuidePrinter requirements and specifications• Proximity to electrical and network connectors• Security of the work area. You may need to place the systemin an area where you can restrict access to it. This may beimportant if your personnel need to print confidentialdocuments or if you are concerned with unauthorized usage.Dimensions and weights of the printer components are listed inthis section, along with diagrams, to help you visualize the sizesand total space requirements.NOTE: There must be a 78 inch / 198 cm vertical clearancethroughout the entire area. In addition, your printer must beinstalled in a fixed location with a minimum clearance space of 36inches / 91.4 cm around all sides of each piece of equipment foraccess by service personnel. In addition, there must be 50 inches/ 126.9 cm clearance space in front of the printer.For information on clearance space and other space planningconsiderations, refer to the “Space planning guidelines” section ofthis chapter. Contact your service representative if you havequestions not specifically addressed in this guide.Printer configurations availableThe following configurations are available for the printer:• Printer + inverter feeder/stacker + 1 feeder/stacker• Printer + inverter feeder/stacker + 2 feeder/stackers• Printer + inverter feeder/stacker + 3 feeder/stackers.Measurements and a top-view diagram for each of theseconfigurations is provided on the following pages.Printer configuration diagramsThe following diagrams show space requirements for three printerconfigurations.Printer withinverter feeder/stacker andone feeder/stackerThe dimensions of the printer with the inverter feeder/stacker andfeeder/stacker are as follows:• Width: 151.25 inches / 384.2 cm• Depth: 38.8 inches / 98.6 cm• Height: 59.6 inches / 151.3 cm• Weight: 2,588 pounds / 1174.9 kg• Total space requirement: 223.25 by 114 inches / 567 by 290.3cm