114 5 Control Panel Menus[IPX/SPX Frame Type]Set the IPX/SPX frame type.Note• [IPX/SPX Frame Type] appears only when the network expansion card (optional) is installed.[Network Settings]Note• [Network Settings] appears only when the PostScript software kit (optional) is installed.Network / PortIPX/SPXFrameTypeSetting Item DescriptionIPX/SPX FrameTypeSets the IPX/SPX frame type.• [Auto] (default)Automatically selects the frame type.• [Ethernet II]Uses the Ethernet frame type.• [Ethernet 802.3]Uses the IEEE802.3 frame type.• [Ethernet 802.2]Uses the IEEE802.2 frame type.• [Ethernet SNAP]Uses the SNAP frame type.Note• After changing this setting, reboot the printer.Network / PortNetwork SettingsNetwork SettingsAdobe ProtocolSetting Item DescriptionAdobe Protocol Sets the Adobe communication protocol.• [Auto] (default)Automatically detects the communication protocol.• [Standard]Select this when the communication protocol is in ASCII format.• [BCP]Select this when the communication protocol is in binary format.• [TBCP]Select this when the communication protocol are both in ASCII and binaryformats and switches between the two using control codes.• [Binary]Select this when no special processing is required for data.Note• Select an appropriate option according to the data format specified on yourprint driver.• [Adobe Protocol] is valid only when printing in PostScript.• After changing this setting, reboot the printer.
